How To Install An Air Conditioner Yourself

Air Conditioning Installation has never been so easy. Here’s How to install it yourself

When installing an air conditioner in your house, you have the option to do it yourself or hire an air conditioning professional to do it on your behalf. The most important thing here is to look for the option that will ensure that your system will be installed in a way that it will work perfectly. Unlike the notion that many people have, it is not so hard to do the installation by yourself. All you need to do is ensure that you have some knowledge and skills on how the installation should be done. You should also keep in mind the building codes in order to comply with them fully. Here are some of the steps you need to follow when installing an air conditioning system.

Step one

First, make a plan to install the AC ducts. To do this effectively, it is advisable you make use of the floor plans of your house so that you understand the best place for you to place these ducts. The major goal here is to ensure there is enough space in areas that are more accessible.

Step two

You should then put the handler close to the condensation plan. Focus on the guidelines given by the manufacturer. Generally, air handlers are usually put in the basement. The air handler should have the capacity to run outside the house and the foundations.

Step three

The third step is to do the installation of the compressor. When installing the compressor, you have to pay attention to the way the power wiring in your house is done. You also need to follow the guidelines provided by the manufacturer. Generally, you need to place the compressor ten to twelve inches from your property. Before you begin doing the installation of the compressor, ensure that you turn off the power. Make sure you place it on top of a flat, well-levelled ground.

Step four

Now it is time to drill holes through your wall. One of the holes is meant for the refrigeration tube and the other one is meant for the electrical tube. Make sure that you fill these holes using strong filler to avoid leakage that might occur. Before switching on your power back, you need to connect the compressor to all the mains.

Step five

After you have connected the compressor to the mains, you should make sure that it has the ability to carry the entire load. Here you might need to seek the services of an electrician for assessment. The electrician will assist in checking the capabilities and requirements. This will ensure that the right installation is done. It is also a great way to guarantee safety in your house.

These practical steps are a simple way to install an air conditioner by yourself. DIY installation will save you the cost of hiring a professional to do the job for you. However, only do it if you are sure that you can do good work. If you’re not capable, spare yourself the grease work and leave all your air conditioning fittings to the experts, like Southern Air Conditioning Canberra.

DIY Air Conditioning Service Tips

DIY air conditioning service tips to save hiring an air conditioning service provider

Maintaining your air conditioner before each hot or cold season begins is critical. Necessary maintenance ensures steady improvement in AC performance and steady decline in energy use. Best of all, you get to save money on costly early replacements and constant repairs. You can save even more bucks by repairing, cleaning or replacing your air conditioner by yourself. Some AC maintenance tasks don’t require the assistance of an HVAC expert. These DIY tips apply to your home’s air conditioning system.

1) Remove debris

You should minimise debris near the exterior condenser unit. Falling leaves, dryer vents, and your lawn mower are some potential sources of debris. Removing debris around the coil allows for sufficient airflow. For effective cleaning, use a dry vacuum cleaner.

2) Clean coil fins

In time, outdoor condenser fins collect dirt and debris. This dirt reduces efficiency by reducing airflow through the fins. Using a fin cleaning spray, clean any built up dirt from the unit. Alternatively, you can spray steam through the fins using a garden hose to blast any debris in the condenser.

3) Straighten the fins

Bent aluminium fins can block airflow through the condenser or evaporator coils. Fin straightening tools, such as fin combs, will fix the fins back into their original condition. You can also use a butter knife to straighten these fins. Be careful not to damage the tubing within the fins.

4) Clean evaporator coil

The air conditioner’s coils collect dirt over their years of service. Likewise, if you neglect to maintain your unit, algae can grow on the evaporator and condenser coil. Dirt collection and algae growth insulate the coil and reduce airflow, thus affecting heat absorption. To avoid this issue, check and clean your evaporator coil at least once every year. If the coil is too dirty, dust it off using a soft brush, and then spray it with a no-rinse coil cleaner.

5) Change the blower filter

A clean filter prevents coils from soiling quickly. But, if you live in a dusty area, over time, the evaporator coil will collect a lot of dirt. Therefore, it is important to replace your filter at least twice a year, particularly before the heating and cooling seasons begin. Be cautious with HEPA or Air Purifying filters, because they can reduce airflow in your unit. Only replace the filter with a new filter which has similar airflow rating.

6) Clean condensate drains

The build-up of mould and algae may potentially clog the drain. Blocked drain channels increase humidity in a unit. The excess moisture can discolour carpet or walls. To prevent flooding in attic units, basement floor, and utility sink, it is best to clean the plugged evaporator drain. Use a dry vacuum to remove any growing biological matter. Also, occasionally pass a wire through your air conditioner’s drain channels.

In the winter or in the summer, an air conditioner in good condition will improve your comfort indoors. If your air conditioning system requires more than regular maintenance, it is best to hire a professional AC service expert. A well-trained technician will locate and fix problems in your unit.

Avoiding Fridge Repairs

Avoiding Fridge Repairs – What You Need To Do

As with all appliances, your refrigerator can take a beating. Any refrigeration technician will advise you that a refrigerator is prone to wear down with continuous use. What next when your refrigerator’s warranty expires? Although a warranty protects your appliance and fixes any issues that may arise – conveniently and affordably – you need to maintain your refrigerator regularly. Taking a few easy steps will prevent your machine from breaking down anytime soon and help you avoid spending more and more on fridge repairs.

1. Don’t overload your fridge

While refrigerators’ general lifespan is about 12-15 years, they tend to wear out due to daily use. Over time, your unit can develop issues with ice and water dispensers, control boards or motors. Fortunately, newer fridges are made sturdy, requiring little maintenance compared to other bigger appliances, such as dishwashers and air conditioning units.

One simple way to limit wear is avoiding overloading your fridge doors, shelves and bins. Putting weight on shelves and doors can damage the hinges and eventually the seal. This requires fairly expensive refrigeration repairs to replace the seal.

2. Provide adequate ventilation

Where you place your house appliances is very important. Proper airflow helps your fridge run efficiently. If your kitchen is not well ventilated, your unit may work overtime and its lifespan greatly reduced.

If a freezer is poorly ventilated it cannot cool effectively or at all. The compressor unit usually warms up to remove heat from the freezer. Thus, there should be several inches of space around the compressor system to prevent it from overheating and failing prematurely.

Although some refrigerators are designed for in-cabinet installation, proper ventilation is recommended to avoid repeated visits from a refrigeration mechanic.

3. Regularly clean and maintain the refrigerator

Fridge condenser coils tend to collect pet hair, dust and debris over time. They are typically located behind and under the unit. Chances are your fridge is not working properly because the coils are not clean enough. A dirty condenser inhibits the transfer of heat from the freezer’s interior to the outside environment. It is a good idea to thoroughly clean the condenser at least once a year or before summer begins.

It is also recommended that you occasionally clean the door gaskets using Vaseline or warm water. This ensures the door closes completely to keep cold air inside the fridge.

4. Always close the refrigerator door

Wondering why your energy bills are increasing by the day? If you leave the fridge door open, the unit will take longer to cool, use more electricity, and overheat its compressor. This is bad news because repairing your compressor is one of the most costly fridge repairs.

A warm compressor, on the other hand, attracts dust from the surroundings of your kitchen. The dust fibres spread to other parts of the refrigerator and finally settle at the air grille. This affects your appliances ventilation and its performance as well. So you should clear the dust at least twice a year.

If you have performed all these maintenance tips and your refrigerator is still not working properly; then you need to call your fridge mechanic for necessary repairs. Avoid fixing it yourself. Following the professional repairs and yet your unit is not in good condition; then it is time to budget for a new, quality refrigerator. For a good refrieration mechanic in Adelaide we recommend – for all your fridge repairs. Contact their team today!

How to Save Money from AC Repairs as a Journey Combined

Central Air Conditioners: Examining the Device Alone

Any time you examine the device by itself, you must confirm all electrical power into the air conditioner is off. The air conditioner’s evaporator, that is certainly basically the gateway in between the ducting in your house and also device outsides, is generally positioned suitable over your furnace. Whether it is available, be sure that it’s clear by making use of a brush or rag to eliminate any filth, buildup, or indications of blockage. Just under the evaporator is definitely the condensation tray which can have amassed mildew or fungus if it’s got not been cleaned successfully. Use a bleaching method into the evaporator to ensure your house shouldn’t be an issue to possibly dangerous mildew spores.“ ”

Whereas these models are generally only capable to nice one space counting on their dimension, it may well certainly be a headache when just one fails to operate accurately or stops functioning entirely. In some cases, the trouble could be an easy to understand like a supporter needing to always be well oiled which you’ll do by including smallish quantities of motor oil to any noticeable oil intakes. In spite of this, complications with will often be the end result of an accumulation of dust and dirt during the device by itself.

Central Air Conditioners: The Ducts

Chances are you’ll intend to make an intensive take a look at of all ducts through the house, looking out for almost any indications of clear cracks, holes, tears, or flaws. Air may very well leak within the issue wherever two sections of ducting are joined in addition. Use duct tape to seal any clear places whereby leaks are developing, but remember this could very well only be ample being a short term remedy. Sooner or later, you can want to switch faulty sections within the ducts fully.

Window Air Conditioners: Filth and Blockage

Window models can certainly be extremely delicate to blockage and grime, and insufficient regime routine maintenance and cleaning are actually a regular explanation for plenty of obstacles men and women from time to time know-how using these air conditioners. Be certain that the device is turned off and unplugged, and look for any noticeable indications of blockage.

Time and energy to connect with a professional?

Air conditioners can experience other dilemmas relevant to some faulty lover motor or simply a defective thermostat. Central air conditioners possess a collection of elements that might solely go harmful or fall short entirely likewise. When this occurs, it happens to be intelligent to make contact with an expert and start the entire process of buying a substitute piece and scheduling set up. Even though some helpful people today will really feel they might deal with these section replacements on their own, air conditioners oftentimes depend upon extremely targeted elements which really should be amazing purchased and set up by specialists.

Air Conditioners: The Filter

The filter is situated instantly driving the unit’s entrance grille, and when some models have an instantly removable entrance grille or obtainable filter, other models would require a couple of screws for being taken out previous to the filter alone is accessed. Even though you really don’t see any principal blockage, it is really a smart idea to continue to keep the filter as clean up as you possibly can along with a cleansing method as well as a moist rag. Just always make sure the filter continues to be totally dried right before you reinstall it.